Rezo Standard Rear Brake Disc & EBC HH Pad Kit - Triumph Daytona 675 06 - 12
- Made from High Grade Stainless Steel
- Direct Bolt On Fit For Your Motorcycle
- Complete with EBC Sintered Brake Pads
High Performance EBC Sintered Brake pads & Rezo Brake Disc Kit
This kit is the perfect fit for your bike, with high performance Rezo brake discs and EBC Sintered Double-H Brake pads
This will come with the required amount of discs and pads for your bike
Rezo Disc Product Info
Outer Diameter: 220mm
Inner Diameter: 105mm
Number of Holes: 4
Hole Diameter: 10.5mm
Disc Type: Fixed Stainless Steel Disc
Inner Ring Colour: Natural
Turning Direction: Universal left or right
Weight: 890 Grams
The rear brake disc is made from heat treated 420 stainless steel with excellent corrosion resistance properties and high temperature (Heat-cycle) durability, both surfaces are diamond ground to produce a parallel flat surface, with a CNC laser cut slotted design and either a standard or waved edge finish.
Please note: Not all rear discs are available in standard and wave patterns.
All Rezo brake discs are made to OEM specifications with the same diameter, offset and fitting points making them a direct replacement for your old units.
Fitting Advice & Warranty information
When installing your new Rezo brake discs - you will need to offset the (front disc) rotor buttons so they are not mirrored left to right and if possible, we recommend fitting new disc bolts which should be tightened to OEM factory torque specifications.
Breaking your new discs in - will take some time; you should especially bear this in mind the first time you ride your bike after fitting. Rezo discs usually take 100 miles to break in and you will notice them getting better the more you use them. Breaking them in should be done with gradual breaking at various speeds over time.
EBC Sintered Double-H Brake Pad Product Info
- High friction rating for maximum stopping power
- Extremely long lifetime - up to 50,000 km
- Super quiet in operation
- UV and KBA tested and approved
EBC Double-H Sintered Superbike pads are the true and undisputed KING of fast motorcycle brake pads. Within one year of their 2004 launch these high performance brake pads became the standard by which all brake pads for street bikes were judged because of their long lasting and powerful brake effect.
Made in the USA, the pads are an exact equivalent of the sintered pad grade supplied in your motorcycle when it was made. The sintered copper alloy provides a longer life and perfect braking. Stainless steel radiator plates are fitted to the pads where required to reduce heat transfer into bikes hydraulics.
With fingertip stopping power in all weathers and an amazingly long life of up to 50,000km, EBC HH pads are a great choice for any motorcyclist looking for a replacement or performance upgrade.
Before fitting new pads - make sure the brake calliper pistons and any slider pins are free and working correctly, if they are stiff or seized they will need to be cleaned or replaced before you continue.
A calliper that is seized or not working correctly can result in the pads not retracting from the disc, causing an excess of heat to build which cannot be dispersed in the necessary time, leading to disc warping.
Warranty - All Rezo brake discs are backed up with a 1 year unlimited mileage warranty, if it fails we will replace it. This warranty does not include the EBC pads as these are wear and tear items
Please note that the primary image is just for illustration purposes and may not be the correct image for the kit you will receive. Please refer to the secondary image onwards for the correct disc and pads for your bike.